|
CUTTER HEAD ORDERING
PROCEDURE |
|
The Best Choice For
VOICE ~ VIDEO ~ SIGNAL ~ DATA
or any application where multiple coaxial connector terminations are required.
|
|
Quick change, very precise cutter heads can be ordered
for any required strip dimension or cable type |
|
Perfect for Coaxial, Triaxial, Semi Rigid Cable
-
Quick
change and interchangeable
-
Supplied specifically for the strip/trim dimensions requested
-
Spacing between blades is fixed at factory
-
Blade
"Depth of Cut" is adjustable
-
Designed to produce extremely precise and repetitive cuts
-
Available Cutters for every type connector and cable, (1, 2, 3, and
4 level strips)
-
Blades make all strips simultaneously and are also independently
adjustable for fine tuning
-
Custom and nonstandard tools are also available for special
requirements.
NOTE: To order Cutter Heads
Supply A, B, C, dimensions or connector part number and cable type |
| |
|
TYPICAL SETUPS FOR
TELECOMMUNICATION |
|
THIS IS JUST A PARTIAL LIST
FOR OTHER STRIP DIMENSIONS
AND CABLE TYPES
CONTACT COASTEL'S TECHNICAL SERVICES DEPARTMENT |
|
Part Number |
Code
Letter |
Strip Dimensions |
Cable Group |
Connector or
Typical Application |
|
A |
B |
C |
|
24-242420I |
I |
.235 |
.235 |
.200 |
735A or equivalent
cable diameters .110"-.160" OD |
Typical
Telecommunications Application
for ADC LCC Connectors |
|
24-242420D |
D |
.235 |
.235 |
.200 |
734A or equivalent
cable diameters .235"-.270" OD |
Typical
Telecommunications Application
for ADC LCC Connectors |
|
24-340916I |
I |
.343 |
.094 |
.156 |
735A or equivalent
cable diameters .110"-.160" OD |
Typical
Telecommunications Application for ADC BNC-H5 Connectors,
Trompeter UPL, or Amphenol |
|
24-340916D |
D |
.343 |
.094 |
.156 |
734A or equivalent
cable diameters .235"-.270" OD |
Typical
Telecommunications Application for ADC BNC-H2 Connectors,
Trompeter UPL, or Amphenol |
|
24-311616I |
I |
.312 |
.156 |
.157 |
735A or equivalent
cable diameters .110"-.160" OD |
Typical
Telecommunications Application for ITT Cannon, Lucent KS, or
Kings #2065 Series |
|
24-311616D |
D |
.312 |
.156 |
.157 |
734A or equivalent
cable diameters .235"-.270" OD |
Typical
Telecommunications Application for ITT Cannon, Lucent KS, or
Kings #2065 Series |
|
| |
|
TYPICAL SETUPS FOR
BROADCAST - VIDEO - NETWORK - CATV |
|
THIS IS JUST A PARTIAL LIST
FOR OTHER STRIP DIMENSIONS
AND CABLE TYPES
CONTACT COASTEL'S TECHNICAL SERVICES DEPARTMENT |
|
Part Number |
Cable Type |
Connector or
Typical Application |
|
24-311616D/1694A |
Belden 1694A
(typical RG59/8241) |
Kings #2065 series
75 ohm BNC |
|
24-311616D/1695A |
Belden 1695A
(typical RG59/8281) |
Kings #2065 series
75 ohm BNC |
|
24-311616D/1505A |
Belden 1505A
(typical RG59) |
Kings #2065 series
75 ohm BNC |
|
24-311616B/1855A |
Belden 1855A
(typical RG58) |
Kings #2065 series
75 ohm BNC |
|
24-340916D/1694A |
Belden 1694A
(typical RG59/8241) |
ADC BNC-H2 |
|
24-340916D/1695A |
Belden 1695A
(typical RG59/8281) |
ADC BNC-H2 |
|
24-340916D/1505A |
Belden 1505A
(typical RG59) |
ADC BNC-H2 |
|
24-340916B/1855A |
Belden 1855A
(typical RG58) |
ADC BNC-H3/H4 |
|
| |
|
ADDITIONAL INFORMATION
|
|
When ordering all other
Cutter Head Cable/Connector
combinations indicate the information required
in steps 1, 2, and 3 |
1. Supply cable type
or cable outside diameter (OD). See table below.
2. Supply "A", "B", "C", trim dimensions, or ...
3. Connector make and model number. |
|
A |
.070-.110" |
RG-174, RG-316,
RG-179, etc. |
|
I |
.110-160" |
RG-180, Lucent 735A,
.141 Semi-Rigid |
|
B |
.160-215" |
RG-58, RG-223, etc. |
|
C |
.190-.230" |
RG-55, RG-141, etc. |
|
D |
.235-.305" |
RG-59, RG6, Lucent
734A, 1505A, 1695A |
|
E |
.300-.430" |
RG-11, RG-8, RG-214,
LMR 400, etc. |
|
For other Cutter Head Trim Codes and cable/connector
combinations, consult Coastel Technical Services |
|
|
 |
 |
|
 |
 |
|
 click
here for Product PDF files |
| |
|
[TOP
OF PAGE] |
|
 |
|
|
|
UPDATED
August 18, 2006 |
|
Copyright © 2001-2006 COASTEL CABLE TOOLS INTERNATIONAL CORP.
All Rights Reserved. |
|
MADE IN USA  |
Coastel Cable
Tools
International Corp.
1211 South Salina Street
Syracuse, New York 13202 USA
1-315-471-5361 FAX 1-315-472-1765 |
1-800-451-7615
|
|
|
|
|
Coastel
Cable Tools looks forward to your feedback. There are several specific
email forms in the menu above or just send a
general email message
by
clicking here.
Thank you for your input! |
|
